Skip to product information
  • Liquitex BASICS MATTE VARNISH 250 ml
1 of 1

Liquitex BASICS MATTE VARNISH 250 ml || ورنيش مطفي من ليكوتكس 250 مل

Regular price 4.950 KWD
Regular price Sale price 4.950 KWD
نضمن لكم جوده المنتج
Only 1 left!

متى يوصل الطلب اذا طلبت الحين ؟

عند تاكيد الطلب , تقدرون تختارون من صفحه التوصيل التالي:
توصيل اكسبرس خلال 9-24 ساعه عمل

توصيل عادي خلال 24-48 ساعه

في حال تم الطلب قبل الساعه 10 صباحا بامكاننا توصيله بنفس اليوم

هل التوصيل مجاني ؟

كل الطلبات اكثر من 25 دك تخولكم للحصول على توصيل مجاني

BASICS MATTE
VARNISH

Permanent matte varnish
for acrylic paintings

Protect and seal your acrylic work with a transparent, matte layer which is breathable, permanent and protects against UV damage.

Sizes
8.45oz/250ml
What it does
  • Adds a matte finish, protects and stops dirt build up
  • Dries clear to a flexible, non-tacky, hard surface
  • Increases brightness and color saturation
  • Improves surface durability - ideal when shipping or exhibiting
  • Protects colors from UV light damage
  • Resists discoloration - yellowing and fogging - caused by humidity, heat and UV
  • Use on flexible or rigid supports
  • Designed for interior and exterior use
How to use it
  • Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness)
  • Ensure your space is well ventilated and dirt and dust-free
  • Place the artwork flat on a surface - always varnish horizontally
  • Use a large, soft brush
  • Stir gently before use
  • Use long, even strokes, covering the surface top to bottom while moving from one side to the other - don't go over bits you have missed but leave to dry and then re-varnish area
  • While applying, look for surface bubbles by inspecting it from all angles and even them out immediately
  • Apply up to three thin coats, allowing at least three hours dry time between coats
How not to use
  • Do not shake or vigorously over-brush as this can result in a foggy, hazy look when dry
  • Don't apply with a roller or sponge brush
  • Don't apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness
  • Don't go back over areas you have already done, as this can cause clouding
  • Don't attempt to remove once applied
  • Do not use with any non-acrylic media